Smart Solar Power Wireless Cycling Electric Holder

Solar Power-Driven

The monocrystalline silicon solar panel improves the efficiency of light energy conversion. The battery keeps storing energy to maintain sensing and use cordless.

Charge Once, Use for a Month

It can be charged via a Type-C cable. The built-in 150mAh
high-efficiency battery offers long battery life.

Electric Clamp, Auto Lock

The infrared sensor is triggered once placing a phone on it to lock automatically and firmly.

For Various Bikes

The base has a built-in double-layer silica gel pad, which can be removed according to the diameter of handlebars.

Base Reinforcement, A Tight Grip

Base silica gel pad: strong friction to prevent the holder from shaking and sliding off.
Base nut: Rotate and lock firmly to enhance the grip of the base.

IP54 Waterproof Rating

IP54 waterproof rating allows it to be used in the rain and effectively prevent accidental spray.

One-Handed Pick and Place

Touch and open, place and lock.

Pick up：Press the back button to open the clamp arms.
Place：Automatically lock a phone once placing by infrared sensing.

Stable and Ant-Shake

Metal clamp arms lock a phone in two directions, so that the phone stays
firmly on the bumpy road, either in horizontal and vertical mode.

Horizontal and Vertical Screen Switch

The 360° universal ball head can be used to change angles at will.

Anti-Mistouch Silica Gel Pad

The pad can cushion and relief stress, and leave a gap between the holder and buttons, without blocking the screen and operation.

Metal Material

It has longer service life as it is high temperature resistant and can be exposed to the sun.

For 4.7-6.7 inch Phones

High compatibility and using with a phone case.

Tool-Free Fast Installation

1.Take out the main body of the bracket and put the nut on the back of the main body.
2.Insert the ball head of the base into the back of the holder and tighten the nut.
3.Rotate the base nut to open the fastener.
4.Remove the silica gel pad of the base according to the handlebar diameter.
5.Fix the fastener on the handlebar properly.
6.Tighten the nut, adjust the angle of the holder and complete.